Articles about "Installation"
Site Preparation (Round Tanks)
To maximise the life of your tank you can prepare your site as follows: Uniform compaction (free from soft spots) and on level ground Tanks can be either placed on a 75-100mm bed of crusher dust (not sand), levelled, boxed and compacted, OR 100mm thick concrete pad All bases must be at least 200mm greater than the […]
Poor Tank Installation and Misuse: How to Avoid Problems with Your Poly Water Tank
The proper preparation and installation of your poly water tank ensure a long and trouble-free life. The majority of poly water tank claims are due to improper installation or overuse. Many issues may have been avoided if the tank owner had followed the instructions that came with the tank. This article looks at some of […]
Using a Dry System to Connect Pipework to Your Rainwater Tank
Installing a rainwater tank would be pointless if it wasn’t connected via pipes to your roof capture area. To harvest rainwater then, you need to connect a pipework to a downpipe from your gutter to your tank that water can flow through. These pipework systems come in two forms: 1) “Dry System” and 2) “Wet System”. This article […]
Using a Wet System to Connect Pipework to Your Rainwater Tank
To harvest rainwater you need to connect pipework to a downpipe from your roof gutter to your tank that water can flow through. Obviously, your tank will remain empty without pipes that lead rainwater into your tank. These pipework systems come in two forms: 1) “Dry Systems” and 2) “Wet Systems”. This article will explain what a Wet […]
Plumbing Requirements for Water Tanks in New Homes
When installing a rainwater tank and you want to use your harvested water throughout your house, then you will obviously need some plumbing work carried out. Such as: fitting downpipes from your roof to your tank connecting your tank overflow to a stormwater system connecting your tank to a pressure pump, etc. Depending on your location and […]
Water Tank Installation
Correct preparation is essential to ensure a long and trouble-free life for your water tank. Base Preparation Our poly tanks are very strong, but it is nonetheless important to have your tank standing on a flat level compacted base. This can be a concrete slab or crusher dust, but not sand. The base of your […]
Site Preparation and Tank Install
Correct site preparation is a must before installing your new Tanks Direct tank and we stress the importance of this to ensure the lasting lifespan of the tank. Below are the correct installation procedures for siting your tank, using the following: Concrete slab Tank stand Above ground on a base of compacted crusher dust to […]
Tank Delivery
Tank delivery from Ayr is free up to 400 km by road, then $330 per tank to 500 km and $550 per tank to 600 km, including GST. Further away, or to an island reached only by boat, we quote.
